The next step we will be putting on the body float on bamboo sticks, which are sold in stores long mini kebabs, or 'land' – a Japanese dish. Dress manufactured by the body on the sharp end of a bamboo, toward the top future float. The time has come to establish attachment float: Take a wire as thick as a pin for sewing works best with stainless steel or nichrome, we have sold in the market to spiral out of nichrome tena, I use it to make a ringlet: take three cm nichrome wire and exaggerates it to the middle. Then the bamboo stick primatyvaem bottom float nylon thread so that the nichrome ring forms for which will be float attached to the gear. A small digression: the best option mounting float – for the lower ring, which allows for a minimum tangling the fishing line and float at throws and overlap.
Fasten to the nichrome wire, we were almost ready to float. Next comes the stage of painting. In order to float the body was not afraid nitrokrasok, the advantage of them – fairly quick drying, we will cover the entire epoxy float. Bamboo stick will not thereafter be afraid of water and foam-nitroenamels fear. And the float will be much stronger and because of this – will increase its service life. But above all, necessary to observe safety rules when working with epoxy glue all the work done only in the open air, I'm working on the balcony. Hands should be wearing rubber gloves to prevent contact with the glue on bare skin. Epoxy resin I breed in 1:10 with hardener and in small amounts, if an error occurs and the adhesive hardens.
Check the fast you can by placing a drop of epoxy on the foil, and heating from below with a match or lighter. A drop of foam and harden on cooling. Thus the adhesive will be on the float. After curing the adhesive body float paint with black paint. do not have to paint it green, or yellow because the fish sees the colors on everything, and once the subject has always scared her. And after water resistant adhesive bonding, they are diversity, the head floats – it fits poplavochek winter, but not necessarily red, as in cloudy weather white, yellow and green buoys are visible on a fairly far distance and on the dark water they sparkle bright pearls … All … float – is ready. It remains to elaborate on mounting the float on fishing rod. The easiest way to get the rubber stopper and placed on the line first couple of top stoppers for hardness in water, then swivel to karabinchikom and the lower two stoppers (stoppers when moving apart, we can turn the float fixed to the sliding float on fishing line). The final step will be placing the mounting of the float in a ringlet karabinchik on the line. Successful catches you with their floats! Lim …