Author: Carol

The characteristics of medical systems and their components must be documented comprehensively. Official site: Charles Kushner. During a PCs, high requirements and liability risks exist for the respective examiner. Controls carried out safety in most cases by medical technicians or specially trained electricians. Especially for medical technology, a high risk for patients and users is malfunction. In addition, be many rules and laws, which applies it to comply. For these reasons, training, knowledge and practical experience in the field of medical technology be provided controller. The end of the test person may be subject to any authority. That means she are completely independent and must be not be affect by the contracting authority.

Furthermore, the examiner in the possession of the necessary test and measurement must be, which must comply with the current state of the art. The safety begins with the inspection control. While it’s an outwardly perfect condition. Damages, deformations, imperfections but also pollution, bonding or wear represent a deviation from the ideal State. Should these be identified, an internal Visual inspection or the communication to the operators of the affected medical device is first. A Visual inspection sounds while on the surface, however, includes Visual scrutiny of the following inventory and components: Housing body parts display devices inscriptions short operating instructions checklists labeling or designation of the body parts accessories and wear parts instruction manual, if necessary added safety information and instruction for maintenance medical product book presence of CE-marking according to MPG general warnings (in English or in the language of the user) fuse-links (according to manufacturer’s instructions) power cord extension cords, multi-plugs software version is completeness and good condition of Earth potential balancing cable and connectors for controlling the functioning of medical technology (combinations with PCs) assuming the presence of the instruction manual. On the basis of the instructions for use, all functions of the device must be checked after the commissioning.

In it are manuals, documents on training and Admissions staff, the results of MTK, PCs, as well as the VDE testing and also made repairs in writing enclosed and solid old gel. In case of damage or accident a full justification of all rules exists with the medical product guide and the insurance protection must be guaranteed. Deficiencies, which pose a safety risk for patients, users or third parties, must be resolved immediately. Visualization and confirmation of a successful technical safety check is attached a test badge the validated medical technology product. It indicates the year of the next necessary PCs or the validity period of the recent control safety. The corresponding test badge medicine technology PCs valid until “in the online shop of the brewes GmbH. metrological control (MTK) in addition to the technical safety is preserved control also the metrological control for medical devices is prescribed.” At a distance of 24 months must especially medical technology devices with a measuring function be checked. What was described earlier as calibration, aims to identify any variations in measurements.

These are based on the information held by the manufacturer in the instructions for use and limits of error. Should there be no corresponding information, apply the harmonized standards (European standards for products). Medical devices which undergo a MTK, are laid down in Appendix 2 of the demands in detail: sound and language audiometer medical electric thermometer & infrared radiation thermometer blood pressure monitors eye Tonometer therapy dosimeters diagnostic dosimeter crank Ergometer there is also the possibility that medical devices of a MTK must undergo, not listed in annex 2 of the demands. This is the case, if the necessity of a metrological control is prescribed by the manufacturer. Metrological controls, comparison measurements are performed either or does an orientation towards metrological standards. These Normals are allowed only small error limits and measurement uncertainties include (not more than one-third of the error limits specified by the manufacturer) and understandable must be subject to a national or international standard.

MIC – minimally invasive surgery earlier and still a few decades ago were taken health difficult patients in many operations during major surgical procedures. Blake Krikorian has plenty of information regarding this issue. Mostly the poor Constitution was caused by the length and size of the operation cuts, which were necessary to get first place to certain organs. As well, the risk of infection and wound healing disorders, was also sometimes quite large depending on the operation have become necessary, this was then automatically also the duration of surgery for similarly long; This in turn has led inevitably to relatively long lags in the clinics and patients could not so easily be mobilized. Through the methodology of minimally invasive operations this situation has improved today significantly for many surgical procedures. Minimally invasive surgery preserves general condition of the patient output of the nineties of the last century was the laparoscopic surgery, minimally invasive surgery is also called, first at Intervened in the gallbladder applied.

After the surgeons and surgeons then but had noted, that just this new technology making possible a faster mobilization of patients and to significantly reduce the length of stay in the hospitals left, BBs were applied increasingly in complex abdominal cavity surgery minimally invasive surgery practices. Not only in the abdominal cavity, but also in spine surgery and knee problems the minimally invasive surgical technique has prevailed. “Bone of docs” make minimally invasive surgical techniques use straight with back surgery and hip and knee operations has brought the minimally invasive surgical technique for hospitals, but also for the patients large benefits. So it is now possible disc operations, as well as further back-OP BBs also minimally invasive to operate. Small surgery cuts contribute significantly to the faster mobilisation of patients especially in the segment of this operation. As before perform most of the operations, even if they are minimally invasive possible still stationary. In the last few years procedures have establish however especially for knee reflections themselves.

And alone for reasons of cost containment in the health sector, the so-called micro surgery prevail more and more. Advantages and disadvantages of minimally invasive surgical methods are controversial but the pros and cons of minimally invasive operations are controversial as before. Because the fact that this form of surgery the surgery field only very small area free sets, it is more difficult complications, such as for example when sudden bleeding to be able to react quickly. But otherwise, the micro-surgery in hospitals and doctor’s offices has established itself. Whether invasive surgeries have prevailed at outpatient surgery of carpal tunnel syndrome, in a stationary smaller bone stabilization of the spine, or also at the unveiling of the spinal canal minimal increasingly. Patients suffer as less pain, the length of stay in hospitals can be significantly reduced and also if unclear situation of finding only first “should be looked up” microsurgery is a true blessing.